TAC - Tannoy Arena Series Speakers

PERFORMANCE
Recommended amplifier power	15 - 100W
Sensitivity (2.83V @ 1m)	88dB
Nominal impedance	8 Ohms
Frequency response (-6dB)	80Hz - 54kHz
CROSSOVER
Crossover frequency	1.75kHz mid to high, 80Hz to subwoofer
Crossover type	2nd order low pass, 1st order high pass
DRIVE UNIT
Dual Concentric Driver	LF 100mm (4.00") mixed fibre pulp cone, dynamic overload protection, HF 19mm (0.75") titanium dome with neodymium magnet system
CONSTRUCTION
Enclosure Type	Ported
Internal volume (Satellite)	2.0L, 0.07cu.ft
Dimensions (Satellite) Including Grille	187.0mm x 133.5mm x 175.5mm
Weight (Satellite)	2.5kg (5.5lbs)

PERFORMANCE
Recommended amplifier power	15 - 100W
Sensitivity (2.83V @ 1m)	88dB
Nominal impedance	8 Ohms
Frequency response (-6dB)	80Hz - 54kHz
CROSSOVER
Crossover frequency	1.75kHz mid to high, 80Hz to subwoofer
Crossover type	2nd order low pass, 1st order high pass
DRIVE UNIT
Dual Concentric Driver	LF 100mm (4.00") mixed fibre pulp cone, dynamic overload protection, HF 19mm (0.75") titanium dome with neodymium magnet system
Bass Driver	100mm (4.00") mixed fibre pulp cone
CONSTRUCTION
Enclosure Type	Ported
Internal volume	2.6L, 0.09cu.ft
Dimensions Including grille	133mm x 245mm x 149mm
Weight	4.0kg (8.8lbs)

PERFORMANCE
Output Power	300W RMS
Low Frequency Response (-6dB)	29Hz
Limit for usable output	16Hz
Input	1 x line level phono
Input Filter	2nd order low pass, 50Hz - 150Hz, -6dB.
Auto Mute	After approximately 12 mins, in absence of input signal
DRIVE UNIT
Driver Type	250mm (10.00”)
CONTRUCTION
Enclosure Type	Closed box
Enclosure Volume	20.0L litre/ 0.7 cu.ft
Additional Features	Phase control, crossover defeat switch for LFE operation, soft limiting to avoid overload, LF extension control
Enclosure Dimensions (Excluding feet)	445 x 350 x 210mm (17.50 x 13.75 x 8.25”)
Weight	14.5kg / 32lbs
Mains Voltage	120V nominal AC ~, 60Hz, 230V nominal AC ~, 50Hz
Mains Fuse	120V - T3.15AL / 250V, 230V - T1.6AL / 250V
Maximum Power Consumption	416VA
Finishes	High Gloss Black